======""DxLink"" Device Family======
=====Video and Control over IP=====
----
Devices are setup for DHCP by default, but will fall-back to static IP settings if DHCP is not available.

===Default IP Settings:===
//DHCP by default, fallback to static IP://
Push ID button until fast blink (static IP mode)
IP=			192.168.1.2
""SubNet""=	255.255.255.0
----
===Device Setup:===
==Dip Switch Settings:==
//For IP over ""DxLink""://
Set Dips= 	||1=ON|2=OFF|3=ON|4=OFF||
Set Dip #3 to ON

//Setup Connection to Master Processor Using TelNet to Device//
Set Device= Device Number
Set Connection= 	Type TCP + Master's IP
Set IP= IP Address (xxx.xxx.xxx.xxx)
Reboot

===TroubleShooting:===
==Device will not Bind or Stay binded to AMX NI master:==
Goto Switcher Web Console-> Settings:  Set ""DxLink"" Ethernet to "Auto" for all ins/outs needed

----
{{backlinks}}