Revision [239]
This is an old revision of AmxHardwareDxLink made by jmussetter on 2015-10-12 20:57:42.
Dx Link Device Family
Video and Control over IP
Devices are setup for DHCP by default, but will fall-back to static IP settings if DHCP is not available.
Default IP Settings:
DHCP by default, fallback to static IP:Push ID button until fast blink (static IP mode)
IP= 192.168.1.2
SubNet= 255.255.255.0
Device Setup:
Dip Switch Settings:
For IP over DxLink:Set Dips=
| 1=ON|2=OFF|3=ON|4=OFF |
Setup Connection to Master Processor Using TelNet to Device
Set Device= Device Number
Set Connection= Type TCP + Master's IP
Set IP= IP Address (xxx.xxx.xxx.xxx)
Reboot
TroubleShooting:
Device will not Bind or Stay binded to AMX NI master:
Goto Switcher Web Console-> Settings: Set "DxLink Ethernet" to "Auto" for all ins/outs neededAmxHardware
