Revision [90]
This is an old revision of VLinxVESP211 made by jmussetter on 2015-10-09 18:48:28.
VLinx VESP211
Ethernet Serial Server
Devices are setup for DHCP by default, but will fall-back to static IP settings if DHCP is not available.
Default IP Settings:
Older revisions:IP= 192.168.0.1
SubNet= 255.255.255.0
IPPort= 4000
Baud= 9600/N/8/1
Newer revisions:
IP= 169.254.102.39
SubNet= 255.255.255.0
IPPort= 4000
Baud= 9600/N/8/1
Device Setup:
Reset Switch Operation:0-2 secs= Initiates a Hardware Reset (reboot)
2-10 secs= Enters Console Mode
>10 secs= Resets to Factory Defaults
The following 1 page(s) belong to VLinxVESP211
| BBElectronics [B&B Electronics] |
